| Magnetic Handles |
Part No.
| Tool Weight. |
Max. Lift |
Penetration and Best Uses |
| Model 20 Gun Chuck |
20106 |
2 |
Not for lifting |
Penetration- 1/8"
* Hold flat parts for sanding, grinding, polishing, buffing, tack welding or positioning
for layout.
* Retrieving hot parts from burn tables.
* Feeding sheets into a press. |
| Model 30 Drill Jig |
20140 |
2 |
Not for lifting |
Penetration- 1/8"
* Quick Jig for drill press, punch press, surface grinding, etc. |
| Model 50 Base Mount |
20109 |
1 |
Not for lifting |
Penetration- 1/8"
* For holding jigs and fixtures to a steel table.
* Has a 1/4" - 20 tapped hole in the center top of the block. |
| Model 100 (Cub) |
20105 |
4 |
100# |
Penetration- 1/8"
* For Handling small sheets 12-24 gauge.
* Feeding sheets into a punch press.
* Stacking steel.
* Light fabrication applications. |
| Model 150 |
20125-1 |
6 |
150# |
Penetration- 1/16"
* Light fabrication application.
* Handling small sheets 12-24 gauge.
* Feeding sheets into a punch press. |
| Model 250 |
20125 |
6 |
250# |
Penetration- 1/16"
* Light and medium fabrication.
* Handling sheets 12-20 gauge.
* Racking and unracking.
* Separating and stacking. |
| Model 400 |
20130 |
8 |
400# |
Penetration- 1/8"
* Handling 8 gauge or heavier.
* Plate burning.
* Align sheets for welding.
* Aligning buckled sheets. |
Model 400 AH
(44" extension handle) |
20131 |
10 |
Not for lifting |
Penetration- 1/8"
* Handling 8 gauge or heavier.
* Handling Manhole Covers.
* Handling and Guiding Trench Plates. |
| Model 600 |
20115 |
10 |
600# |
Penetration- 1/8"
* Handling 8 gauge or heavier.
* Plate burning.
* Aligning sheets.
* Pulling buckled sheets.
* Stacking and unstacking. |
Model 600 AH
(44" extension handle) |
20115-1 |
14 |
Not for lifting |
Penetration- 1/8"
* Handling 8 gauge or heavier.
* Handling Manhole Covers.
* Handling and Guiding Trench Plates. |
| Model 600 CA |
20171 |
12 |
600# |
Penetration- 1/8"
* Handling 8 gauge or heavier.
* Handling Dies, Jigs, Steel Plate, and Machine Fixtures.
* Use on Spreader Bar.
* Shipboard or Shipyard.
* Emergency Tie Down.
* Float Scaffold Typing. |
| |
| Magnetic Angles |
Part No.
| Tool Weight. |
Max. Lift |
Penetration and Best Uses |
| Model B-40 (Inside Angle) |
20107 |
3 |
Not for lifting |
* To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower. |
| Model B-41 (Outside Angle) |
20151-1 |
4 |
Not for lifting |
* To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower. |
| Model B-80 (Inside Angle) |
20135 |
5 |
Not for lifting |
* To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower. |
| Model B-81 (Outside Angle) |
20150-1 |
5 |
Not for lifting |
* To hold plate or sheet steel at right angles, without losing position for welding.
* Magnetic Angles eliminates the use of vises and additional manpower. |
| Adjustable Angles |
|
|
|
Adjustable Angles have a built-in Protractor. |
| Model B-40 A (Adjustable Angle) |
20151 |
4 |
Not for lifting |
* To hold plate or sheet steel at 45 to 90 degree angles for positioning or welding. |
| Model B-80 A (Adjustable Angle) |
20150 |
5 |
Not for lifting |
* To hold plate or sheet steel at 45 to 90 degree angles for positioning or welding. |
| |
| Magnetic Fishing Tools |
|
|
|
* For Drillers of blast holes, water wells, explorations, etc.
* The Magnetic Field is directed out of the bottom of the tool.
* No Magnetism on the sides, thus it will not adhere to casings.
* Capacity depends on the surface area of contact with the item being fished.
* An assured capacity is not feasible except on a flat, clean surface. |
| 3 1/2" Fishing Tool |
20153 |
9 |
150# |
For 4" Casings |
| 4 1/2" Fishing Tool |
20154 |
14 |
350# |
For 5" Casings |
| 5 1/2" Fishing Tool |
20155 |
20 |
600# |
For 6" Casings |
| 6 1/2" Fishing Tool |
20156 |
26 |
800# |
For 7" Casings |
| |
| Bar Type Magnetics |
|
|
|
A Thousand and One Uses
Has a standard 1/4" hole spaced 3/4"
from one end for hanging or mounting. |
| Magnetic Bar: 5/8" X 1 1/4" X
3" - 48" in length |
20110 |
Per inch |
|
* Collecting Metal Particles out of Tanks, ie: Oil, Cooling, etc.
* Collecting Steel Cuttings around Drill Presses, Milling Machines, Grinders, Duct Collectors, etc.
* Magnetic Tool Rack. |
